Anodized Ti LAN Ti Pineapple

$104.00$140.00

If  you need a tritium installed, pls click here to add into cart.

There are colorful Ti rings available here, to replace the clip.  (The light doesn’t work well without the clip or ring)

Light comes with a rechargeable 14500 battery.   (Unprotected, button top cell is suggested. Protected one is longer, it might give too much pressure to the spring and cause an issue.)

 

Specs:

  • Material: solid titanium
  • Nichia 219B SW45K R9080   or XPL HI 6000K
  • Reverse polarity protection
  • LVP (low voltage protection) for Li-ion battery
  • Temperature control to avoid overheating problems
  • Anti-reflective coated lens
  • Aluminum alloy  reflector
  • Easy clicky switch operation
  • Tail-stand capability
  • Pocket clip
  • Dimensions: 3.8 x 0.8 in (9.7 x 2.16 cm)
  • Weight: 2.3 oz (65 g) without battery
  • Spare O-rings
  • 1 tritium slot at tail switch, 3 around head, 12 around tailcap

Programming Guide

1. Turn on the light.

2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.

a. 1 blink: mode group selection. Press the button to enter this menu.

i. 1 blink: (ML)-2%-20%-100%

ii. 2nd blink: (ML)-10%-40%-100%

iii. 3rd blink: (ML)-2%-10%-50%

iv. 4th blink: (ML)-50%-100%-strobe-SOS

It then repeats. Press the button during any blink to select that mode group.

b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.

c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.

d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.

e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.

Shorcut: quick double tap to turbo.

Options

Black Oil Pineapple-Nichia, Black Oil Pineapple-XPL, Blu-pur Splash Pineapple -Nichia, Blu-pur Splash Pineapple -XPL, Blue circuit Pineapple-Nichia, Blue circuit Pineapple-XPL, Black Oil LAN-Nichia, Black Oil LAN-XPL, Blu-pur Splash LAN -Nichia, Blu-pur Splash LAN -XPL, Blue circuit LAN-Nichia, Blue circuit LAN-XPL

Reviews

There are no reviews yet.

Be the first to review “Anodized Ti LAN Ti Pineapple”

Your email address will not be published.

Follow us

adsadas

Scroll to Top