ReyLight LAN copper&brass

(2 customer reviews)


If  you need a tritium installed, pls click here to add into cart.

There are colorful Ti rings available here, to replace the clip.  (The light doesn’t work well without the clip or ring)

Light comes with a rechargeable 14500 battery.   (Unprotected cell is suggested. Protected one is longer, it might give too much pressure to the spring and cause an issue.)

All lights are polished and cleaned, then sealed in vaccum bag. Though it might still patina in the bag.

(Energizer Lithium Primary 1.5V battery might have a problem. The inside of it is still lithium, and the voltage and discharging current is limited.)


  • Material: Solid brass or copper
  • Nichia 219B SW45K R9080
  • Reverse polarity protection
  • LVP (low voltage protection) for Li-ion battery
  • Temperature control to avoid overheating problems
  • Anti-reflective coated lens
  • Aluminum alloy  reflector
  • Easy clicky switch operation
  • Tail-stand capability
  • Pocket clip
  • Dimensions: 3.8 x 0.8 in (9.7 x 2.16 cm)
  • Weight: 3.3 oz (93 g) without battery
  • Spare O-rings
  • 1 tritium slot at tail switch, 3 around head, 12 around tailcap

Programming Guide

1. Turn on the light.

2. Press the button 8+ times. The light will now blink once, then strobe, blink twice, then strobe, blink three times, then strobe…After 5 blinks and a strobe, the sequence repeats.

a. 1 blink: mode group selection. Press the button to enter this menu.

i. 1 blink: (ML)-2%-20%-100%

ii. 2nd blink: (ML)-10%-40%-100%

iii. 3rd blink: (ML)-2%-10%-50%

iv. 4th blink: (ML)-50%-100%-strobe-SOS

It then repeats. Press the button during any blink to select that mode group.

b. 2 blinks: mode memory on-off toggle (default off). Press the button during the two blinks or during the strobe after to turn mode memory on. Repeat to turn mode memory off.

c. 3 blinks: moonlight mode off-on toggle (default on). Press the button during the three blinks or during the strobe after to turn moonlight off. Repeat to turn moonlight on.

d. 4 blinks: mode order toggle (default LMH). Press the button during the four blinks or during the strobe after to change the mode order from Low Medium High to High Medium Low. Repeat to reverse the order.

e. 5 blinks: factory reset. Press the button during the five blinks or during the strobe after to reset the light to factory settings.

Shorcut: quick double tap to turbo.


Copper, Brass

2 reviews for ReyLight LAN copper&brass

  1. DesertLumens (verified owner)

    I originally had a 3rd gen smooth body 2aa titanium lan with all trits. It was so beautiful. So beautiful I rarely carried I because I was scared I’d break a trit. I needed cash so I was forced to sell it. But I refused to sell it to anyone. One of my best friends bought it and he’s in love. I was able to pick up a copper but no trits just orange in the power switch. Now this light will get lots of carry time. Thank you again brother for everything! Jason~ Desert Lumens

  2. Brian

    This review is going to be different than you may be used to. I’m not going to comment on the UI or lumens or any other topics typically written. I’m going to look at the esthetic beauty in relation to design and Use. This llight took the quintessential look of a flashlight we all think of and elevated it up to pure elegance and grace. The simple clean lines crave to be held. I was taught the raw broken down elements of any design can be simplified as “Form follows function”. When you look at this light it may fool you with its very clean, with simple lines. The curves are soft and the complete look states elegance and sophistication. Every line, each change in thickness has one or multiple purposes. An example of what I mean is it not only does it disappear in your hand from comfort, those features that accomplish that comfort are also doing a amazing job of dissipating heat. Even though it has a smooth surface the grooved lines and thickness graduations creates a platform to comfortably grip the torch without fear dropping it. When most think of metal our minds think of it being cold and hard not very inviting. The Lan on the other hand is soft and subtle to the touch. With L.e.d lights cold is not a concern , heat is. This light gets warm, not hot. Yes copper is a great help but its the design that is really doing the work. When you pick it up the Reyligt Lan you won’t want to put it down. It leaves the realm of being just a tool and it becomes a extension of yourself. To create light that works is not the same as creating one that hits top marks on /function/looks/ease of use/comfort/ grip/ a true tool. Accomplishing this is very difficult and few lights will make the grade at them all. The Lan not only achieves this but it sets the bar so high that most makers won’t even see it. That is rare. The Took the idea of “form follows function” to its extreme by combing a multitude of functions and expectations of a flashlight into one elegant light. Owning and carrying the Lan makes the hard edges in life we normally would get discouraged by. It turns them into something we now do without effort and will seek out for fun. The Lan is simple to the layman but few people can achieve bringing together so many difficult elements into a harmonious union that will cause us to forget they could be a concern in the first place. The Lan is a true Work of Art. It creates a wide range of emotions In a myriad of mediums. I’m torn because I want to use it daily and also treat it as the work of Art that it is.

Add a review

Your email address will not be published. Required fields are marked *

Follow us


Scroll to Top